DC-DC Converter        ST10 Series     [ 10 Watts ]             General Description     10W 2:1 & 4:1 Wide Input Range with Compact Size of DC to DC Converter for PCB Mounting ST series is been designed in 2 X 1 standard size delivering output power from 10~20 watts. Widely input range 2:1 and 4:1 with isolation voltage 1600 VDC; also offer optional remote on/ off control function.       Feature   ◆ Standard Size in 1.97 x 1.0 x 0.425 inches ◆ DIP Product with Nickel-Coated Copper with Non-Conductive Base, Six-Side Shielded ◆ Package: Module for PCB Mountable and Screw Terminal ◆ Operating Temperature: -25~70 degrees ◆ 2:1 & 4:1 Wide Input Range ◆ Isolation Voltage 1600 VDC ◆ Remote On/ Off Control Pin ◆ Minimum Load 0~3% (of full load) ◆ Single and Dual Outputs ◆ Safety Approval by UL and CE       Specification   All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.   Input Specification     Characteristics Conditions min. typ. max. unit     Voltage Range  Io nom  Vi : 12V (2:1) 9   18 VDC     Vi : 24V (2:1) 18   36 VDC     Vi : 24V (4:1) 10   40 VDC     Vi : 48V (2:1) 36   75 VDC     Vi : 48V (4:1) 18   75 VDC     Filter type                       Output Specification     Characteristics Conditions min. typ. max. unit     Output Power     6.6   10 W     Voltage Accuracy Vi nom, Io nom       ±2 %     Minimum Load Vi nom   0   3 %     Line Regulation Vi min ...Vi max, Io nom     ±0.5   %     Load Regulation Vi nom, 10%Io...Io nom     ±1   %     Ripple Vi nom, Io nom, BW = 20MHz 0.2% Vout +40 max. mV     Noise Vi nom, Io nom, BW = 20MHz 0.5% Vout +50 max. mV     Temperature Coefficient Vi nom, Io nom       ±0.02 % / ℃     Short Circuit Protection Current limit, Auto-recovery                       General Specification     Characteristics Conditions min. typ. max. unit     Switching Frequency Vi nom, Io nom     300   KHz     Isolation Voltage Input  / Output   1600     VDC     Isolation Resistance Input  / Output   100     MΩ     Operating Temperature 2:1 Range: at Full Load -25   +70 ℃       4:1 Range: with derating -25   +70 ℃     Storage Temperature Non operational   -55   +105 ℃     Humidity         95 % RH     Cooling Free air convection                       Physical Specification     Characteristics Conditions min. typ. max. unit     Dimension Tolerance ±0.5 50.1 x 25.4 x 10.8 mm     1.97 x 1.0 x 0.425 inches     Weight     32 g     Case Material Nickel-Coated Copper with Non-conductive Base, Six-side Shielded                         Model.                     Model No. Input Range Output Voltage Output Current Eff ( V.DC ) ( V.DC ) ( mA ) (%) Single Output Models 2:1 Range ST10-12-3.3S 9 ~ 18 3.3 2000 74 ST10-12-5S 9 ~ 18 5 2000 80 ST10-12-12S 9 ~ 18 12 830 81 ST10-12-15S 9 ~ 18 15 670 82 ST10-12-24S 9 ~ 18 24 420 81 ST10-24-3.3S 18 ~ 36 3.3 2000 74 ST10-24-5S 18 ~ 36 5 2000 81 ST10-24-12S 18 ~ 36 12 830 84 ST10-24-15S 18 ~ 36 15 670 85 ST10-24-24S 18 ~ 36 24 420 84 ST10-48-3.3S 36 ~ 75 3.3 2000 76 ST10-48-5S 36 ~ 75 5 2000 81 ST10-48-12S 36 ~ 75 12 830 84 ST10-48-15S 36 ~ 75 15 670 84 ST10-48-24S 36 ~ 75 24 420 84 4:1 Range ST10-24F-3.3S 10 ~ 40 3.3 2000 67 ST10-24F-5S 10 ~ 40 5 2000 75 ST10-24F-12S 10 ~ 40 12 830 75 ST10-24F-15S 10 ~ 40 15 670 75 ST10-48F-3.3S 18 ~ 75 3.3 2000 66 ST10-48F-5S 18 ~ 75 5 2000 75 ST10-48F-12S 18 ~ 75 12 830 77 ST10-48F-15S 18 ~ 75 15 670 75 Dual Output Models 4:1 Range ST10-24F-5D 10 ~ 40 ±5 ±1000 75 ST10-24F-12D 10 ~ 40 ±12 ±415 75 ST10-24F-15D 10 ~ 40 ±15 ±333 75 ST10-48F-5D 18 ~ 75 ±5 ±1000 75 ST10-48F-12D 18 ~ 75 ±12 ±415 77 ST10-48F-15D 18 ~ 75 ±15 ±333 77                 [ Download DataSheet ]