Home  /   Contact us  /  FAQ  /  Site Map  /  c餤        
Company Products New Products Distributor News Service & Support
 
 
Quick Search
AC-DC ITE Power Module
AC-DC Household Power Module
AC-DC Medical Power Module
AC-DC Medical Swiching Power Supply
Open Frame Type
U Bracket Type
Enclosed Type
AC-DC ITE Switching Power Supply
Open Frame Type
U Bracket Type
Enclosed Type
AC-DC ITE Full Brick
DC-DC Converter
Safety Listing
 
      Safety Listing  
     
 
 
          UL 60950-1 :
  All AD-DC Power Supplies are approved by UL under 60950-1 regulation, you may check the UL listing with our file number E199779.
 
 
          UL 60601-1 :
  Our Medical products are approved by UL under 60601-1 regulation, you may check the UL listing with our file number E308218.
 
 
          CB :
  1. The following AC-DC Power Supply are approved by CB under IEC60950-1 regulations:
      AHC, AFC, APCN, ATCN ANCN, AFC20, AKC, ATC30, ASC, AJC, AQC100, AQF120,AQF240,AQF360
  2. The following Medical products are approved by CB under IEC60950-1 regulations:
      MTC, MSC
 
 
          CE :
  All Power Supplies are CE compliant.
 
 
          RoHS :
  All Power Supplies are RoHS compliant.
 
 
          REACH :
  All Power Supplies are REACH compliant.
 
 
 
          The EMC Directive Applies to Component Power Supplies
  All Arch power supply units are categorized as components power supply. According to regulation of EMC, please install the power supply within system and measure the EMC from the output load. The result is in accordance with application and assembly of the end product. To test the component (power supply unit) alone is for references only. Interpretation of EU document Guide for the EMC Directive 2004/108/EC; product such as adaptor, external adaptor which end users will attached directly to finished appliances must apply EMC regulations; in contrast component power supply is incorporated by manufactures into enclosures of finished appliances so is ruled out of EMC regulations. Out of consideration of end systems must apply EMC regulations that Arch power supply units are tested to meet the EMC requirements which listed on datasheet and EMC reports.  
  Arch standard power supply units used by end customers for many different applications and are unable to be tested after incorporated inside the end systems. But put into consideration mainly the end systems are metal enclosures so will put most of Class I power supplies on metal plates to conduct EMI testing (illustration as following, some specified models will have different testing methods though, please refer to how to connect to test stated on the EMC reports), and use resistive load (simulated load) to test (Class II power supply then will be tested without connecting to any metal board and FG); Particular usages such as LED lighting then will use LED light output to test (please follow the standards stated the EMC report). The above mentioned EMI qualification all tested by third party laboratories and CE declarations are made and signified by the testing report. As well as non periodic inspected to ensure all Arch products have met the requirements of the regulations. For detailed testing information please contact Arch or Arch distributors.  
  Down Load The EMC Directive Applies to Component Power Supplies pdf File  
 
  Please contact us for the latest certificate.