Home  /   Contact us  /  FAQ  /  Site Map  /  c餤        
Company Products New Products Distributor News Service & Support
 
 
Quick Search
AC-DC ITE Power Module
AC-DC Household Power Module
AC-DC Medical Power Module
AC-DC Medical Swiching Power Supply
Open Frame Type
U Bracket Type
Enclosed Type
AC-DC ITE Switching Power Supply
Open Frame Type
U Bracket Type
Enclosed Type
AC-DC ITE Full Brick
DC-DC Converter
Safety Listing
 
  DC-DC Converter      
        ST60 Series     ( Module )   
 
    DC-DC Converter  
  60 Watts          Feature  
     
 
ST60 Series


  Standard Size in 2.08 x 1.08 x 0.53 inches
  Six-side shielded Aluminum with Non-Conductive base, Black Anodize
  Operating Temperature: -40~80 degrees
  4:1 Wide Input Range
  Regulated Output
  High Efficiency
  Remote ON/OFF Control
  Protections: Over Voltage / Over Temperature / Short Circuit /
  All by Auto-recovery
  Safety approval by CE
  
  
 
        Safety Approval: Down Load ST60 Series SPC.
Down Load ST60 Series 3D File
   
         
    Specification
  1.All specifications valid at nominal input voltage,full load and +25XC after warm-up time unless otherwise stated.
2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output
 
           
      Input Specification  
      Characteristics     Conditions  
      Voltage Range     4:1 Range:   18 ~ 72 VDC
  
  
 
         
  
 
      DC-DC OFF     When -DC IN and ON/OFF CTL is Short
 
           
     Output Specification  
      Characteristics     Conditions  
      Output Power     60 Watt  (max.)  
      Voltage Accuracy
    (Full Load and Nominal Vin)
    Single:   2%  
           
           
      Minimum Load     (at Full Load)       
      Line Regulation    
    (10% to 100% at Full Load)
    Single:   0.5% (typ.)  
           
           
      Load Regulation    
    (10% to 100% at Full Load)
    
    
    Single:   1% (typ.)  
           
           
      Ripple    (20MHz bandwidth)     12S:150mV (Vp-p) (max.)  
      others:1% Vout  
      Noise    (20MHz bandwidth)     12S:150mV (Vp-p) (max.)  
      others:1% Vout  
      Temperature Coefficient     0.05% / XC  (max.)  
      Short Circuit Protection     Auto-recovery  
           
     General Specification  
      Characteristics     Conditions  
      Switching Frequency       (typ.)  
      Isolation Voltage  (Input to Output)     1600 VDC  (min.)  
      Operating Temperature     -40 J to +80 J  (with derating)  
      Storage Temperature     -45XC to +100XC  
      Humidity     95% RH  (max.)  
      Cooling     Free air convection  
           
     Physical Specification  
      Characteristics     Conditions  
      Dimension    (Tolerance 0.5)     52.8 x 27.5 x 13.5 mm  
      2.8 x 1.08 x 0.53 inches  
      Weight     Pending  
      Case Material     Six-side shielded Aluminum with Non-Conductive base, Black Anodize  
           
 
      Model  
   
     
 
Model No.
(Ordering Part No.)
Input Range Output Voltage Output Current Eff
( V.AC ) ( V.DC ) ( mA ) ( % )
Single Output Models
 ST60-48-12S 18 ~ 72 VDC  12    5000 91
 ST60-48-15S 18 ~ 72 VDC  15    3700 90
 ST60-48-24S 18 ~ 72 VDC  24    2350 90
 ST60-48-12S X 18 ~ 72 VDC  12    5000 91
 ST60-48-15S X 18 ~ 72 VDC  15    4000 90
 ST60-48-24S X 18 ~ 72 VDC  24    2500 90
 
     
  Please refer to the PDF file published on the web site as the final version.